How to program dish network remote to work with Panasonic DVD Home Theatre Sound System?

Question

I have a Panasonic DVD Home theatre sound system (SA-HT70) and my remote is a 20.0 IR please help

Answer 1

Hi, my name is Kim and I form part of the Social Media Department with DISH. I would be happy to assist you with programming your remote to the Panasonic Home Theater. The codes are 783,808, or 818. You will most likely want to program the remote to work in the AUX mode and here are the steps.



Press and hold down the AUX button on the top right side of the remote until all the other buttons on top light up and then let go.



If you are programming a code into AUX Mode, you must do the following before entering the device code:



Press 0 for a TV (if TV code is 500, enter 0500)



Press 1 for a VCR/DVD (if DVD code is 617, enter 1617)



Press 2 for any other device (if device code is 639, enter 2639)



Then enter the 3 digit code 783, 808, & 818.



Press the Pound (#) button under the number 9.



AUX Volume Override:



Then you will need to place the remote in Aux Volume override which will have the remote change the volume on the surround sound and not the TV.



1. Press and hold the AUX mode button. To disable AUX Volume, press and hold the TV mode button. All the buttons on top will light up.



2. Press the pound (#) under the number 9.



3. Press the Volume UP button.



4. Press 0 (Zero)



5. Press Pound #.



If you have any additional questions or concerns, please email me directly at:[e-mail] Thank you!



Kimberly Escobar

Social Media Representati

DISH L.L.C

Answer 2

You can program your 20.0 DISH remote to UHF and I am more than happy to help you with this. When you remove the battery cover you should see a switch to the left of the batteries, please move it to UHF.

I will provide you our link to provide step by step instructions; http://www.mydish.com/support/change-uhf-band-20-21?WT.svl=leftnav



Thanks

Answer 3

Panasonic Sa-ht70